Frequency choice

The effect of frequency on cell coverage means that different frequencies serve better for different uses. Low frequencies, such as 450 MHz NMT, serve very well for countryside coverage. GSM 900 (900 MHz) is a suitable solution for light urban coverage. GSM 1800 (1.8 GHz) starts to be limited by structural walls. This is a disadvantage when it comes to coverage, but it is a decided advantage when it comes to capacity. Pico cells, covering e.g. one floor of a building, become possible, and the same frequency can be used for cells which are practically neighbours. UMTS, at 2.1 GHz is quite similar in coverage to GSM 1800. At 5 GHz, 802.11a Wireless LANs already have very limited ability to penetrate walls and may be limited to a single room in some buildings. At the same time, 5 GHz can easily penetrate windows and goes through thin walls so corporate WLAN systems often give coverage to areas well beyond that which is intended.

Moving beyond these ranges, network capacity generally increases (more bandwidth is available) but the coverage becomes limited to line of sight. Infra-red links have been considered for cellular network usage, but as of 2004^[update] they remain restricted to limited point-to-point applications.

Cell service area may also vary due to interference from transmitting systems, both within and around that cell. This is true especially in CDMA based systems. The receiver requires a certain signal-to-noise ratio. As the receiver moves away from the transmitter, the power transmitted is reduced. As the interference (noise) rises above the received power from the transmitter, and the power of the transmitter cannot be increased any more, the signal becomes corrupted and eventually unusable. In CDMA-based systems, the effect of interference from other mobile transmitters in the same cell on coverage area is very marked and has a special name, cell breathing.

Old fashioned taxi radio systems generally use low frequencies and high sited transmitters, probably based where the local radio station has its mast. This gives a very wide area coverage in a roughly circular area surrounding each mast. Since only one user can talk at any given time, coverage area doesn't change with number of users. The reduced signal to noise ratio at the edge of the cell is heard by the user as crackling and hissing on the radio.

One can see examples of cell coverage by studying some of the coverage maps provided by real operators on their web sites. In certain cases they may mark the site of the transmitter, in others it can be calculated by working out the point of strongest coverage.